cobas Cobas Analyzer Portable Fully Automated Chemistry Analyzer Cobas C311 For Medical

Short Description:

Sample barcode type: Code 128; Codabar(NW7) ; Interleaved 2 of 5 ; Code 39
System interface: RS 232 serial interface, bidirectional connection Cobas? The link data station and Cobas? e-library
Remote diagnostic interface and automated Download
Sample database: 10000 routine / emergency samples
Analytical method: 1-point endpoint method, 2-point rate method, 2-point endpoint method, 3-point method, rate a method, rate a + serum index method, rate a blank method, rate B method, etc.
Calibration methods: linear method, nonlinear multipoint method, K-factor method;
A maximum of 100 calibrator preprograms and a maximum of 180 calibration curves


Product Detail

Product Tags

1
2
3
6

Cobas C 311 automated biochemistry analyzer

Product Detail

System Overview: Automatic, continuous biochemical analysis system

Test speed: optical speed 300 test/hour; ISE speed 450 test/hour;

Number of reagent channels :42 reagent positions (optical detection);

ISE module 3 channels (electrolyte detection)

Number of project parameters: The maximum number of project parameters can be set to 117; ISE is three; Calculate 8 items,

Sample type: serum, plasma, urine, CEREBROspinal fluid, whole blood (HbA1c)

Sample input: Loading capacity: 53 outer rings

(108 positions in total) 55 inner circles

(Automatic reading of outer and inner bar codes, automatic sample detection)

Real immediate emergency function, you can add samples at any time during operation

Sample tube type: Original tube: 5-10 ml; 16 x 100, 16 x 75, 13 x 100, 13 x 75 mm

Sample cup: 2.5ml, trace cup: 1.5ml

Inside cup: Sample cup can be placed inside 16 x 75/100 mm sample tube

Sample cups can be placed in non-standard tubes

Flat tube can be placed

Sample reaction: 1.0 -- 35 L, stepped by 0.1 L

Sample dilution: 3 -- 121 times diluted > 100 L

Sample clot detection function: Yes

Minimum sample size: Original tube: 700 L;

Sample cup: 100 l;

Trace cup: 50 L

Sample barcode type: Code 128; Codabar(NW7) ; Interleaved 2 of 5 ; Code 39

System interface: RS 232 serial interface, bidirectional connection coBAS? Link data stations and Cobas? e-library

Remote diagnostic interface and automatic download

Sample database: 10,000 routine/emergency samples

Analysis methods: 1 point end point method, 2 point rate method, 2 point end point method, 3 point method, rate A method, rate A+ serum index method, rate A blank method, rate B method, etc.

Calibration methods: Linear method, nonlinear multi-point method, K-factor method;

A maximum of 100 calibration products can be pre-programmed, and a maximum of 180 calibration curves can be stored.

The calibration information function of the standby kit;

Two different K-calibration factors can be defined for different sample types

Quality control methods: real-time quality control, single quality control, cumulative quality control;

Up to 100 quality control pre-programmed programs;

Calibrate the backup reagent quality control to perform the shielding function

Automatic quality control executive function

Retest/reflection: automatic, manual retest

System automatic reflection function

Current/voltage: 230/400v AC AC3/N/PE

110 volts ac

Power: 1.5KVA

50/60 Hz +/ -0.5%

Water supply/waste: Water quality requirements: sterile deionized water, maximum resistivity 1.0 S/cm

Water consumption: no more than 12 litres/hour

Water pressure: 0.5 -- 3.5 kg/cm3 (49 -- 343 KPa)

Water temperature: 15-30 ℃

Quality certification system: GS, CE, UL, C-U]8 mesh 7UN7654 3 to 4

Operating conditions: Ambient temperature: 15-32 ℃

Environmental humidity: 30-85% (RH)

Heat output: 2 kcal/h

Noise output: < 65 dB

Physical size: Length: 1338 mm Width: 855 mm height: 1262 mm

Weight: 270 kg

 

5
4

  • Previous:
  • Next:

  • Write your message here and send it to us
    :